(Translation)
Machines and acessories
1. NAME: OILER
Quantity: 13
Characteristics: With pump. Vertical. Oil capacity: 250g.
2. NAME: EXHAUSTER
Quantity: 1
Characteristics:Electric, to exhaust the fumes issued by torches
and welding apparatus.
3. NAME: DRILL
Quantity: 6
Characteristics: Electric. Portable. Two speed, (double insulation).
Chuck fit for 1mm to 13mm drill bits. Ref.: 220 V
4 . NAME: GRINDER
Quantity: 3
Characteristics: Electric. Portable. Adaptable for discs, abrasives
and sand paper.
- Disc : up to 175 mm - identical to BOSCH 1300 model (double
insulation). Ref.: 220V
5. NAME: DRILLING MACHINE
Quantity: 1
Characteristics: Including stand and a 1.25 C.V motor. Turning
base. Chuck for bits of up to 15mm.
- Chuck's course: 100mm
- Depth of feed: 200 mm
- Dimensions of base: 260mm x 260mm
- Variable speed from 100 to 2500 rpm.
Ref.: 380V
6. NAME: BENCH GRINDER
Quantity: 2
Characteristics: Electric, with stand and 1.5 C.V. motor. Complete
with 2 grinding wheels (fine and coarse) to sharpen and scrape
steel. Ref.: 380V.
7. NAME: GOGGLES
Quantity: 17
Characteristics: For grinding protection, with clear lens.
8. NAME: GUILLOTINE
Quantity: 1
Characteristics: Mechanic. Operated by electric motor. Able to
cut sheet metal of up to 1 meter width and up to 4mm thick.
9. NAME: JACK
Quantity: 1
Characteristics: Hydraulic, portable, with adapter for bars and
acessories that can stretch and set into place car body parts.
Identical or similar to the FZ 59, Porto - Power model.
10. NAME: JACK
Quantity: 1
Characteristics: Hydraulic, mounted on wheels, to lift vehicles
of up to 5 tons.
11. NAME: PORTABLE SPOT WELDING UNIT
Quantity: 4
Characteristics: Transformer and timer mounted on wheels, complete
with 1.7 m flexible leads and electrode holder. Water cooled electrodes.
Welding capacity: 2.5 + 2.5 mm
Minimum spots per hour: 200
Identical to IBE 4-53 EK model.
Ref.: two phased 380V.
12. NAME: SHEET METAL FOLDER
Quantity: 2
Characteristics: Hand operated, for folding up to 2mm plate.
Folding length: 1.5 m
13. NAME: PRESS
Quantity: 1
Characteristics: Hydraulic, hand operated. Up to 50 tons capacity.
14. NAME: ARC WELDING UNIT
Quantity: 4
Characteristics: Portable welding unit, rotary type, transformer
for continuous current of 200A - 60% rate.
Continuous control of current variation.
Minimum open circuit voltage: 50V
Input voltage: 220/380 V
Power: 9 to 13 KW.
15. NAME: GAS WELDING AND CUTTING UNIT
Quantity: 13
Characteristics: Portable unit mounted on trolley. With acessories.
- 2 regulators - one for Oxigen and another for Acetylene.
- 2 hoses of 6m each. One black hose, one red hose.
16. NAME: SHEARS
Quantity: 2
Characteristics: With hand lever. To cut sheet metal up to 3mm
thick.
17. NAME: SHEARS
Quantity: 3
Characteristics: Electric. Portable. To cut steel sheet of up
to 1.5mm thick. (mild steel) Approximate weight: 1.4 Kg. (double
insulation). Ref.: 220 V
18. NAME: ABRASIVE WHEEL DRESSER
Quantity: 1
Characteristics: To be used on grinding wheels. Complete with
spindle of 50 mm.
19. NAME: NIBBLER
Quantity: 3
Characteristics: Universal electric, portable, and able to cut
sheet metal of up to 1.3 mm thick (mild steel).
Approximate weight of 1.6 Kg. (double insulation). Ref.: 220 V.
20. NAME: SPRAY GUN
Quantity: 2
Characteristics: Electric. For painting. Cup capacity: 1 litre.
Identical or similar to the "Mistral" model 150. Ref.:
220 V.
21. NAME: ELECTRODE HOLDER
Quantity: 8
Characteristics: With electrodes. For spot welding equipment.
350 mm.
22. NAME: SWAGE
Quantity: 1
Characteristics: Hand operated. Identical or similar to the brand
"Mamel" no. 4. Complete with accessories (12 pairs of
wheels).
23. NAME: ELECTRODE HOLDER
Quantity: 5
Characteristics: For 250A electrodes.
24. NAME: CLAMP
Quantity: 5 pieces
Characteristics: For earthing.
25. NAME: CABLE
Quantity: 5 meters
Characteristics: For connecting to power supply.
26. NAME: LEAD
Quantity: 5 meters
Characteristics: For earth connection.
27. NAME: ELECTRODE LEAD
Quantity: 5 meters
Characteristics: For connecting the electrode holder. Of 50 mm2
section.
28. NAME: PRESS
Quantity: 1
Characteristics: To attach parts to the punching machine.
- Pressing capacity of 100 mm.
- V shaped serrations for griping of cylindrical pieces, both
verticaly and horizontaly.
29. NAME: STRAIGT GRINDER
Quantity: 1
Characteristics: Electric, portable, and double insulated. For
small rectifying grinding wheels of 6mm shank.
Load 330W; 30,000 r.p.m; weight of 1.7 Kg.
(Identical or similar to "AEG" ref.: 65,180)
Working Tools
1. NAME: COMBINATION PLIERS
Quantity: 13
Characteristics: Chrome-vanadium steel. Length of 200 mm. Jaws
working length: 39 mm. Length of cutting edges: 15 mm.
2. NAME: OBLIQUE CUTTERS
Quantity: 13
Characteristics: Made of chrome-vanadium steel. Total length:
200 mm. Width of jaws: 28 mm. Able to cut mild steel wire of up
to 2.5 mm.
3. NAME: ADJUSTABLE PLIERS
Quantity: 13
Characteristics: Adjustable pliers, with 6 adjustment positions.
In vanadium steel or similar metal. Chrome plated. Total length
of 150 mm, jaw opening width of 50 mm. Length of jaw: 30 mm.
4. NAME: ROUND NOSE PLIERS
Quantity: 13
Characteristics: Made of chrome-vanadium steel. Total length:
170 mm. Lenth of the nose: 47 mm. at the end of the nose: 2mm.
5. NAME: SELF GRIP WRENCH
Quantity: 25
Characteristics: Made of chrome-vanadium steel. Total length:
250 mm. Weight of ± 520g.
6. NAME: SELF GRIP WRENCH
Quantity: 13
Characteristics: Made of chrome-vanadium steel. Lenth: 280 mm.
Jaw opening: 51 mm. Approximate weight: 890 grams. (Contoured
jaws for allowing soldering.) Identical or similar to "Hazet
no. 758-1).
7. NAME: EYELET PLIER
Quantity: 4
Characteristics: For "POP" type eyelets. Identical or
similar to the "TUCKER TT55A".
8. NAME: CAULKING TOOLS
Quantity: 4 sets
Characteristics: For car body repair. Identical or similar to
the "Hazet no. 1926, 1927, 1928, 1929, and 1930." (High
speed steel).
9. NAME: BITS
Quantity: 36 sets
Characteristics: Helicoid. Cylindrical shaped with a of 1 to 6
mm in 0.25 mm intervals. (High speed steel)
10. NAME: BITS
Quantity: 12 sets
Characteristics: Helical. Cylindrical shaped, with 6.5 to 10 mm
in 0.25 mm intervals. (High speed steel)
11. NAME: BITS
Quantity: 6 sets
Characteristics: Helical. Cylindrical shaped, with 10.25 to 15
mm in 0.25 mm intervals. (High speed steel)
12. NAME: ANVIL
Quantity: 1
Characteristics: Ironsmith type. 60 Kg. with wooden block - Drawings
no.: 3011.
13. NAME: DIE
Quantity: 12
Characteristics: Made of high speed steel. Rectified thread of
38.1 R/M6.
14. NAME: DIE
Quantity: 12
Characteristics: Made of high speed steel. Rectified thread of
38.1 R/M7.
15. NAME: DIE
Quantity: 12
Characteristics: Made of high speed steel. Rectified thread of
38.1 R/M8.
16. NAME: DIE
Quantity: 12
Characteristics: Made of high speed steel. Rectified thread of
38.1 R/M9.
17. NAME: DIE
Quantity: 12
Characteristics: Made of high speed steel. Rectified thread of
38.1 R/M10.
18. NAME: SPANNER
Quantity: 9 sets
Characteristics: Open ended spanners between 6 and 22 mm.
19. NAME: SPANNER
Quantity: 6 sets
Characteristics: Ring spanners between 6 and 22 mm.
20. NAME: SPANNER
Quantity: 6 sets
Characteristics: Sockets between 6 and 22 mm. Complete: (Handle,
extension, universal joint, and ratchet.)
21. NAME: SCREWDRIVER
Quantity: 13
Characteristics: 4 x 125
22. NAME: SCREWDRIVER
Quantity: 13
Characteristics: 6 x 150
23. NAME: SCREWDRIVER
Quantity: 13
Characteristics: 9 x 220
24. NAME: SCREWDRIVER
Quantity: 6
Characteristics: Offset 90º 6 x 150
25. NAME: RECESSED HEAD SCREWDRIVER (PHILLIPS)
Quantity: 12
Characteristics: for DIN 7962/7963 3 x 60 recessed head screws.
26. NAME: RECESSED HEAD SCREWDRIVER (PHILLIPS)
Quantity: 12
Characteristics: for DIN 7962/7963 4 x 95 recessed head screws.
27. NAME: RECESSED HEAD SCREWDRIVER (PHILLIPS)
Quantity: 12
Characteristics: for DIN 7962/7963 6 x 140 recessed head screws.
28. NAME: RECESSED HEAD SCREWDRIVER (PHILLIPS)
Quantity: 6
Characteristics: for DIN 7962/7963 8 x 160 recessed head screws.
29. NAME: RECESSED HEAD SCREWDRIVER (PHILLIPS)
Quantity: 6
Characteristics: for DIN 7962/7963 11 x 180 recessed head screws.
Hexagonal blade.
30. NAME: RECESSED HEAD SCREWDRIVER (PHILLIPS)
Quantity: 6
Characteristics: Offset 90º, for recessed head screws nos.:
4 to 10.
31. NAME: ADJUSTABLE WRENCH
Quantity: 4
Characteristics: Jaw opening to 30mm.
32. NAME: TUBULAR SOCKETS
Quantity: 2 sets
Characteristics: 6 to 22mm with handle bar.
33. NAME: "HALLEN" SOCKETS
Quantity: 3 sets
Characteristics: For DIN 912 M4, M5, M6, M8 and M10 bolts.
34. NAME: ADJUSTABLE SPANNER
Quantity: 4
Characteristics: Jaw maximum opening: 40 mm.
35. NAME: WHEEL BRACE
Quantity: 2
Characteristics: Cross shaped.
36. NAME: SET
Quantity: 13 sets
Characteristics: 6 pieces: 2 - 165 x 15 and 130 x 11 punches;
2 - 150 x 4 and 125 x 5 round head punches; 1- 130 x 4 chisel
and 1- 120 x 10 pin punch identical or similar to the Belzer-Vanadium
Extra.
37. NAME: COUNTERSUNK HEADS
Quantity: 12
Characteristics: for 4mm rivet nuts.
38. NAME: DIE STOCKS
Quantity: 12
Characteristics: for circular 38.1 mm dies
Ref.: according to numbers 13, 14, 15, 16 and 17.
39. NAME: TAP WRENCH
Quantity: 12
Characteristics: adjustable type for R/M 1 to 6 taps.
40. NAME: TAP WRENCH
Quantity: 12
Characteristics: adjustable type for R/M 6 to 16 taps.
41. NAME: RIVETING TOOL
Quantity: 12
Characteristics: for 4 mm rivets.
42. NAME: BRUSH
Quantity: 13
Characteristics: For files.
43. NAME: STAKE
Quantity: 13 sets
Characteristics: set of 4 pieces made of hard steel. Drawings
nos.: 3032 and 3033. Ref.: Must be custom made.
44. NAME: SOLDERING IRON
Quantity: 13
Characteristics: 250 gr. soldering iron. Drawings no.: 3049.
45. NAME: CLAMP
Quantity: 12
Characteristics: no.: 2, semi-fast pressure.
46. NAME: CLAMP
Quantity: 24
Characteristics:no.: 4, semi-fast pressure.
47. NAME: LIGHTER
Quantity: 13
Characteristics: for gas weldding. Including flints.
48. NAME: FILE
Quantity: 12
Characteristics: (American type) with Belzer type holder.
49. NAME: FILE
Quantity: 26
Characteristics: Parallel, bastard, 150.
50. NAME: FILE
Quantity: 26
Characteristics: Parallel, bastard, 200.
51. NAME: FILE
Quantity: 26
Characteristics: Parallel, bastard, 250.
52. NAME: FILE
Quantity: 26
Characteristics: Parallel, bastard, 300.
53. NAME: FILE
Quantity: 13
Characteristics: Parallel, second, 150.
54. NAME: FILE
Quantity: 13
Characteristics: Parallel, smooth, 150.
55. NAME: FILE
Quantity: 26
Characteristics: half round, bastard, 250.
56. NAME: FILE
Quantity: 26
Characteristics: half round, bastard, 150.
57. NAME: FILE
Quantity: 13
Characteristics: half round, smooth, 150.
58. NAME: FILE
Quantity: 12
Characteristics: Warding, Second, 100.
59. NAME: FILE
Quantity: 12
Characteristics: Knife, Second, 100.
60. NAME: FILE
Quantity: 13 sets
Characteristics: Round, bastard - 1/8, 3/16, 1/4, 5/16 and 3/8".
61. NAME: FILE
Quantity: 13
Characteristics: Round, smooth, 1/4.
62. NAME: FILE
Quantity: 13 sets
Characteristics: Square, bastard - 1/8, 3/16, 1/4, 5/16 and 3/8".
63. NAME: FILE
Quantity: 1 set
Characteristics: Radial cut. Identical or similar to Belzer no.:
1450 D/2.
64. NAME: GLOVES
Quantity: 6 pairs
Characteristics: Gauntlet. Arc welding type. 4 fingers and thumb.
65. NAME: MALLET
Quantity: 13
Characteristics: Wooden - 75 x 135.
66. NAME: MALLET
Quantity: 13
Characteristics: Rubber head - 75 x 135.
67. NAME: WELDING TORCH
Quantity: 13
Characteristics: Gas welding no.: 0. Complete with nozzles.
68. NAME: WELDING TORCH
Quantity: 13
Characteristics: Gas welding no.: 1. Complete with nozzles.
69. NAME: FACE SHIELD
Quantity: 5
Characteristics: For arc welding. Made of fibre. Adjustable to
head.
70. NAME: HAMMER
Quantity: 13
Characteristics: Adjusting hammer, with handle. 350 g.
71. NAME: HAMMER
Quantity: 13
Characteristics: Ball pein hammer, with handle. 400 g.
72. NAME: HAMMER
Quantity: 3
Characteristics: Ball pein, with handle. 1500 g.
73. NAME: HAMMER
Quantity: 13
Characteristics: Ball pein, with handle. 350 g. For car body repair.
74. NAME: HAMMER
Quantity: 13
Characteristics: Ball pein, with handle. 250 g. For car body repair.
75. NAME: HAMMER
Quantity: 13
Characteristics: Planishing hammer. With round face and square
pein. 300 g. Identical or similar to Belzer's 3721.
76. NAME: HAMMER
Quantity: 13
Characteristics: Pecking hammer. Ball shaped pein. With handle.
300g. Identical or similar to Jaguar's.
77. NAME: HAMMER
Quantity: 13
Characteristics: Planishing hammer. With handle. 200 g. Identical
or similar to Jaguar's.
78. NAME: HAMMER
Quantity: 13
Characteristics: Long planishing hammer. 36mm face. 175mm length.
Identical or similar to Hazet's 1946.
79. NAME: HAMMER
Quantity: 13
Characteristics: Planishing hammer. Round faces. Identical or
similar to Belzer's 3722.
80. NAME: HAMMER
Quantity: 13
Characteristics: Pecking hammer. With handle. Pointed pein. 400
g.
81. NAME: HAMMER
Quantity: 13
Characteristics: Planishing hammer. Convex face. 300g.
82. NAME: MALLET
Quantity: 12
Characteristics: 3kg. With handle. Identical or similar to Jaguar's
53130.
83. NAME: TAPS
Quantity: 13 sets
Characteristics: Normal rectified cutting. M3 to M10mm.
84. NAME: TAPS
Quantity: 2 sets
Characteristics: Left hand cutting. Identical or similar to Belzer
1430.
85. NAME: BURS
Quantity: 13 sets
Characteristics: Made of high speed steel. 6 to 10 mm. Cone shaped.
"Paris" type.
86. NAME: GOGGLES
Quantity: 13
Characteristics: Protective with clear green lenses. (For gas
welding).
87. NAME: GOGGLES
Quantity: 13
Characteristics: For grinding. With clear lenses.
88. NAME: HANDLE
Quantity: 13
Characteristics: For "Eclipse" type saw blade.
89. NAME: HAMMER
Quantity: 5
Characteristics: Chipping hammer for arc welding.
90. NAME: SCRAPER
Quantity: 13
Characteristics: Normal type, 150. With handle.
91. NAME: HACKSAW
Quantity: 13
Characteristics: Hand operated metal saw. "Eclips" type.
92. NAME: VICE
Quantity: 25
Characteristics: 130 mm, portable.
93. NAME: VICE
Quantity: 13
Characteristics: Bench vice made of dye-cast steel. Parralel no.
5.
94. NAME: SHEARS
Quantity: 13
Characteristics: 260 mm. Hand operated. For cutting plate.
95. NAME: SCISSORS
Quantity: 13
Characteristics: 220 mm. Hand operated. For cutting cardboard.
96. NAME: DOLLY
Quantity: 13
Characteristics: Straight. Drawings no.: 3029.
97. NAME: DOLLY
Quantity: 13
Characteristics: Convex. Drawings no.: 3029.
98. NAME: DOLLY
Quantity: 13
Characteristics: Heel dolly. Identical or similar to Jaguar 101.
99. NAME: DOLLY
Quantity: 13
Characteristics: Wedge dolly. Identical or similar to Jaguar 102.
100. NAME: DOLLY
Quantity: 13
Characteristics: Oval dolly. Identical or similar to Jaguar 103.
101. NAME: DOLLY
Quantity: 13
Characteristics: Blotter shape dolly. Identical or similar to
Jaguar 104.
102. NAME: DOLLY
Quantity:13
Characteristics: Straight. Identical or similar to Jaguar 105.
103. NAME: DOLLY
Quantity: 13
Characteristics: Vice shaped dolly. Identical or similar to Jaguar
106.
104. NAME: DOLLY
Quantity: 13
Characteristics: Vice shaped dolly. Identical or similar to Jaguar
107.
105. NAME: DOLLY
Quantity: 13
Characteristics: Vice shaped dolly. Identical or similar to Jaguar
108.
106. NAME: DOLLY
Quantity: 13
Characteristics: Vice shaped dolly. In hard steel. Drawings no.:
3041.
107. NAME: PINCERS
Quantity: 13
Characteristics: In steel. Identical or similar to the Krefting
4770.
108. NAME: CREASING TOOL
Quantity: 13 sets
Characteristics: For body work. In hard steel. Sets of 3 pieces.
Drawings no.: 3034. Ref.: Must be custom made.
109. NAME: CREASING TOOL
Quantity: 13
Characteristics: For engraving rims. Made of hard steel. Drawings
no.: 3031. Ref.: Must be custom made.
110. NAME: PUNCH
Quantity: 6 sets
Characteristics: Hollow punch. In hard steel. between 6 and 13mm.
111. NAME: PRY BAR
Quantity: 13
Characteristics: To open edges. For car body work. Drawings no.:
3035. Ref.: Must be custom made.
112. NAME: RASP
Quantity: 3
Characteristics: Half round. 300 mm. With handle.
113. NAME: PUTTY KNIFE
Quantity: 3 sets
Characteristics: American type. Complete set.
114. NAME: DRILL
Quantity: 4
Characteristics: Hand operated with 0 to 6 mm chuck.
115. NAME: SPANNER
Quantity: 4 sets
Characteristics: Combination spanner in inches. Identical or similar
to the Hazet 600/8A1.
116. NAME: BLOCK (?)
Quantity: 13
Characteristics: For hammering with faces and edges planed. 200
x 200 x 40 mm.
Drawing and measuring tools
1. NAME: DIVIDERS
Quantity: 13
Characteristics: With tempered points. Aperture of 90º. Length
of 220 mm.
2. NAME: CALIPER
Quantity: 4
Characteristics: Outside calipers. Length: 220 mm. Identical or
similar to the Belzer 1082.
3. NAME: CALIPER
Quantity: 4
Characteristics: Outside calipers. Length: 300 mm. Identical or
similar to the Belzer 1082.
4. NAME: CALIPER
Quantity: 4
Characteristics: Inside calipers. Length: 200 mm. Identical or
similar to the Belzer 1082.
5. NAME: DIVIDERS
Quantity: 13
Characteristics: With hardened arms and points. Tempered. Length:
220 mm.
6. NAME: SQUARE
Quantity: 13
Characteristics: Precision engineer's square. Normal. Polished.
150 mm.
7. NAME: SQUARE
Quantity: 13
Characteristics: Combination square. Normal. Polished. 200 mm.
8. NAME: SQUARE
Quantity: 13
Characteristics: Simple square. Normal. Polished. 150mm.
9. NAME: TAPE MEASURE
Quantity: 13
Characteristics: Metalic. Length: 2 meters. (Box type).
10. NAME: VERNIER CALIPER
Quantity: 4
Characteristics: With a ruler of 160 (vernier of 1/10).
11. NAME: LEVEL
Quantity: 3
Characteristics: In die-cast steel. 600 x 500 mm with a rectified
side.
12. NAME: RULER
Quantity: 13
Characteristics: Adjustible and normal.
13. NAME: RULER
Quantity: 13
Characteristics: Flexible, in stainless steel, and graduated.
Length: 300 mm.
14. NAME: RULER
Quantity: 4
Characteristics: Semi-rigid, in stainless steel, and graduated.
Length: 1000 mm.
15. NAME: RULER
Quantity: 4
Characteristics: Rigid, in stainless steel, and with a length
of 1500 mm.
16. NAME: ENGINEER'S SCRIBER
Quantity: 13
Characteristics: Offset. With a length of 250 mm.
17. NAME: BEVEL SQUARE
Quantity: 4
Characteristics: Current model, in stainless steel. With a 200
mm ruler.
Drawing material
1. NAME: ERASER
Quantity: 2
Characteristics: For writing boards.
2. NAME: SHARPENER
Quantity: 13
Characteristics: Made of aluminium.
3. NAME: COMPASS
Quantity: 13
Characteristics: For drawing, in tin-plate or inox. With lead
holder. Length: 130 mm. For the students use.
4. NAME: COMPASS
Quantity: 1
Characteristics: Wooden. Length of 40 cm.
5. NAME: STAMP
Quantity: 1
Characteristics: For drawing classification.
6. NAME: SQUARE
Quantity: 1
Characteristics: Wooden. Graduated. 45º.
7. NAME: SQUARE
Quantity: 1
Characteristics: Wooden. Graduated. 60º. 500 mm.
8. NAME: SQUARE
Quantity: 13
Characteristics: Plastic. 45º.
9. NAME: SQUARE
Quantity: 13
Characteristics: Plastic. 60º.
10. NAME: POINTER
Quantity: 1
Characteristics: Wooden
11. NAME: RULER
Quantity: 1
Characteristics: Wooden. Graduated. Length: 1 meter.
12. NAME: RULER
Quantity: 13
Characteristics: Plastic. Graduated. Length: 500 mm.
13. NAME: RULER
Quantity: 13
Characteristics: "T" shaped. Plastic. Length: ±
500 mm.
14. NAME: PROTRACTOR
Quantity: 1
Characteristics: Wooden. Graduated in degrees (for use on the
board).
15. NAME: PROTRACTOR
Quantity: 13
Characteristics: Plastic. Graduated in degrees (for use of the
students).
16. NAME: SCISSORS
Quantity: 1
Characteristics: Paper scissors. ± 250 mm blades.
Furniture
1. NAME: CLOCK
Quantity: 1
Characteristics: Wall clock.
2. NAME: CLOCK
Quantity: 1
Characteristics: Register clock
3. NAME: BOARD
Quantity: 1
Characteristics: Cork board. 1000 x 1000 mm.
4. NAME: BOARD
Quantity: 2
Characteristics: For the wall. Green color. With a 5 mm grid.
5 . NAME: CLOSETS
Quantity: 17
Characteristics: Made of metal. For students dressing room.
6. NAME: BENCH
Quantity: 1
Characteristics: Individual vice and welding bench. To be used
by the monitor. Made of angle iron and mild steel plate. With
drawer and closet with door. Drawings no.: 3009.
7. NAME:
Quantity: 15
Characteristics: Individual vice and welding bench. For the use
of the students. Made of angle iron and mild steel plate. With
drawer and closet with door. Drawings no.: 3009.
8. NAME: FIRE EXTINGUISHER
Quantity: 6
Characteristics: Fire extinguisher.
9. NAME: VOID
10. NAME: DESK
Quantity: 1
Characteristics: For use of the monitor. With chair.
11. NAME: STUMPS
Quantity: 15
Characteristics: Wooden. For hammering. Drawings no.: 3010.
12. NAME: VOID
Home
